Connected hooks ANKER

Connected hooks ANKER

It is a connection made of hooks joined with a transverse wire.

Used successfully for over 50 years in conveyor and conveyor belts.

The cross wire stabilizes the connection and prevents loosening of individual hooks.

Specially designed for belts used in agriculture, food industry and logistics.

Types of combined hooks:

Type A30

Specially designed for use in thin belts (e.g. filter belts and PTFE-coated high temperature belts)

Technical Specifications:

  • wire diameter: 0.80mm
  • pitch: 2.54mm
  • tape thickness: up to 2.5 mm
  • minimum roll diameter: 50 mm
  • slats of length: 300 or 600 mm

Type A34

Specially designed for feeders and bending machines in laundries .

Technical Specifications:

  • wire thickness: 0.90 x 0.50 mm;
  • pitch: 2.54mm;
  • tape thickness: up to 2.0 mm
  • minimum roll diameter: 50 mm
  • available in slats of 150mm length

Type A35

Specially designed
for thin belts.

Technical Specifications:

  • wire dimensions: 0.90 x 0.60 mm
  • pitch: 2.54 mm
  • tape thickness: up to 2.0 mm
  • minimum roll diameter: 50 mm
  • strips with a length of 150, 300 or 600 mm

Type A36

Specially designed
for a wide range of applications.

Technical Specifications:

  • wire dimensions: 0.90 x 0.70 mm
  • pitch: 2.54mm
  • tape thickness: up to 4.0 mm
  • minimum roll diameter: 25 mm
  • slats of length: 300 or 600 mm

Type A40

Designed for a variety of applications (e.g. filter belts adapted to work with higher loads, felts for ironing machines).

Technical Specifications:

  • wire diameter: 1mm
  • stroke: 3.175mm
  • tape thickness: up to 4.0 mm
  • minimum roll diameter: 50 mm
  • slats of length: 300 or 600 mm
  • on special order up to 1.5 m

Types A2-A7

Designed for a variety of applications in industry, agriculture and logistics.

Technical Specifications:

  • wire diameter: 1.2 mm (A2 and A3), 1.38 mm (A4-A7)
  • pitch: 3.67mm
  • tape thickness: up to 10 mm
  • minimum roll diameter: 50 mm
  • slats of length: 300 or 600 mm
  • on special order up to 2.5 m

Types G00-G006

Designed for a variety of applications including table transport, where particularly flat and wear-resistant connections are preferred.

Technical Specifications:

  • thickness: 0.50mm and 0.75mm
  • pitch: 4mm
  • tape thickness: up to 3 mm
  • minimum roll diameter: 20 mm
  • strips of length: 300, 600, 900, 1200 and 1500 mm or adapted to the width of the strip
Return back to the "Anker" tab

Information about other products can be found at www.c-t-p.com.pl

Centrum Taśm i Pasów 2024 Wszelkie prawa zastrzeżone.